Description
- Scissors Lift Tables elevate, lower, position and transport a wide variety of loads, preventing repetitive stress injuries for workers and increasing productivity.
- Photo sensor-managed optional lift controls can continuously adjust table to keep consistent, ergonomically-correct height for manual loading and unloading.
- Lift tables can be operated manually or integrated into an automatic conveyor system. A control console is provided for safety functions, manual operation and selection of automatic modes of operation.
- Lift bases provided by Southworth Products Corp., widely acknowledged as the leading maker of hydraulic lifts. Southworth machines are rugged and reliable and are designed for years of trouble-free service.
Specs
| Cylinder Rod Diameter (Typical): |
Standard Lift:
Standard 1.5" (38mm)
Optional High Cycle Lift:
Oversized to 1.75" (44mm) |
| Center Pivot Pin/ Bushings and Retention: |
Standard Lift:
Stress-Proof Pin. DU Style Bushings and Welded Washers.
Optional High Cycle Lift:
Regreasable Stress-Proof Pin/Fiberglass Style. Bushings and Both Shaft Collars and Snap Rings. |
| Cylinder Clevis Pin/ Bushings and Retention: |
Standard Lift:
Stress-Proof Pin. DU Style Bushings and Keepers.
Optional High Cycle Lift:
Regreasable Stress-Proof Pin/Fiberglass Style. Bushings and Keepers. |
| Upper and Lower Hinge Pin/ Bushings and Retention: |
Standard Lift:
Stress-Proof Pins. DU Style Bushings and Cotter Pins
Optional High Cycle Lift:
Regreasable Stress-Proof Pins/Fiberglass Style. Bushings and Cotter Pins |
| Rollers and Bushings: |
Standard Lift:
Steel with DU Style Bushings
Optional High Cycle Lift:
Regreasable Needle Bearing Cam Followers |
| Roller Wear Strips: |
Standard Lift:
None
Optional High Cycle Lift:
Welded cold-rolled steel |
| Cycle Capacity Before Major Overhaul†: |
Standard Lift:
50,000
Optional High Cycle Lift:
200,000 |
† One Cycle is calculated as one full up and down with no jogs and a uniform 80% rated load.
Features
- Fully adjustable lowering speed for operator safety and comfort
- Contoured Legs combined rigidity, decreased deflection and no welded blocks while allowing a lower collapsed height without the need for a pit in many cases
- Safety Check Valves near the cylinder prevent sudden, unexpected platform collapse in the unlikely event of a hydraulic system failure
- Lubricated-for-Life Bearings and Wear-Indicating Rollers on base for easy maintenance
- Huge assortment of sizes, load capacities, elevation and collapsed heights ensures complete integration with adjacent devices
- Normal cylinder weepage directed to reservoir—not to the floor as on Presto Lifts
- Full-width pivot pins promote straighter tracking of the legs throughout the travel—vital for eccentric loads
- Generous 3:1 strength factor on all structural elements
- Aircraft-quality, wire-reinforced, high-pressure hose is rated at least three times the actual operating pressure
- Roll retainers on legs and platform prevent oversize platforms from "tipping up"
- Full-width straight-through axles increase overall stability and tracking through the vertical travel range
- Designed and built to ANSI MH29.1: the standard that covers the safety requirements for industrial scissors lifts
- UL Listed electrical components meet National Electrical Code (NEC) requirements
|